No drilling preparation, no template.
Self tapping of the screws through the belt.
Good compatibility with scrapers.
- Wear and cut resistant | |
- quick (save down time) | - Perfect for tubular belts |
- under all weather conditions | - Flexible |
- no need of electricity power | - Leak proof |
- no use/need of expensive equipment | - High tensile strength |
- without need of physical strength or specific skills | - Compatible with small pulley diameter by bias installation |
- no drilling preparation, no template | - Can be used for a short insert on the conveyor system |
- self tapping screws through the belt | - Suitable for high-heat belt up to 200°C and very low temperatures (-50°C) |
- on textile and PVC (steel cord belts as an emergency) | - Compatible with conveyor belt scraper |
- Available in coil or «ready to use» cut specific lengths | |
- Many rubber qualities available | |
- For antimagnetic splice (magnet belts) use screws and inserts made of antimagnetic stainless steel |
Super-Screw® | 35 | 40 | 63 /65 | 80 | 85 | 100 | 105 | 125 | 127 | 180 | 185 | 200 | 205 |
Final belt thickness, mm |
4-11 | 4-11 | 4-13 | 4-15 | 5.1-15 | 5.1-15 | 6.1-14 | 7-20.5 | 7-19 | 7-20.5 | 7-19 | 7-19 | 7-17.5 |
Maxi belt tension, N/mm | 31 | 40 | 63 | 80 | 80 | 100 | 100 | 125 | 125 | 180 | 180 | 200 | 200 |
Maxi belt strength, N/mm | 315 | 400 | 630 | 800 | 800 | 1 000 | 1 000 | 1 250 | 1 250 | 1 800 | 1 800 | 2000 | 2 000 |
Mini Pulley Ø, mm |
160-200 | 180-200 | 220-300 | 250-300 | 250-400 | 300-350 | 300-400 | 350-500 | 350-500 | 400-800 | 500-650 | 500-1 000 |
650-1 000 |